kai2nenobu - wsl-ssh-agent 1.6.6

Helper to interface with Windows ssh-agent.exe service from WSL, replacement for ssh-agent-wsl.

PM> Install-Package wsl-ssh-agent -Version 1.6.6 -Source https://www.myget.org/F/kai2nenobu/api/v3/index.json

Copy to clipboard

> nuget.exe install wsl-ssh-agent -Version 1.6.6 -Source https://www.myget.org/F/kai2nenobu/api/v3/index.json

Copy to clipboard

> dotnet add package wsl-ssh-agent --version 1.6.6 --source https://www.myget.org/F/kai2nenobu/api/v3/index.json

Copy to clipboard
<PackageReference Include="wsl-ssh-agent" Version="1.6.6" />
Copy to clipboard
source https://www.myget.org/F/kai2nenobu/api/v3/index.json

nuget wsl-ssh-agent  ~> 1.6.6
Copy to clipboard

> choco install wsl-ssh-agent --version 1.6.6 --source https://www.myget.org/F/kai2nenobu/api/v2

Copy to clipboard
Import-Module PowerShellGet
Register-PSRepository -Name "kai2nenobu" -SourceLocation "https://www.myget.org/F/kai2nenobu/api/v2"
Install-Module -Name "wsl-ssh-agent" -RequiredVersion "1.6.6" -Repository "kai2nenobu" 
Copy to clipboard

  wsl-ssh-agent

IMPORTANT NOTE ON PROJECT HISTORY

This project was started at the time when WSL2 did not exist and Microsoft just implemented AF_UNIX socket support. Today it is useful only when WSL1 is being required - which is really rare. Sharing Windows side ssh-agent with WSL2 does not need wsl-ssh-agent.exe at all! Please, read on next section on how to setup WSL2 and only continue after that if you really working with WSL1.

WSL2 compatibility

At the moment AF_UNIX interop does not seem to be working with WSL2 VMs. Hopefully this will be sorted out eventually. Meantime there is an easy workaround (proposed by multiple people) which does not use wsl-ssh-agent.exe and relies on combination of linux socat tool from your distribution and npiperelay.exe. For example put npiperelay.exe on drvfs for interop to work its magic (I have winhome ⇒ /mnt/c/Users/rupor, copy wsl-ssh-agent-relay into your ~/.local/bin directory, and add following 2 lines to your .bashrc/.zshrc file:

${HOME}/.local/bin/wsl-ssh-agent-relay start
export SSH_AUTH_SOCK=${HOME}/.ssh/wsl-ssh-agent.sock

You really have to be on WSL 2 in order for this to work - if you see errors like Cannot open netlink socket: Protocol not supported - you probably are under WSL 1 and should not use this workaround. Run wsl.exe -l --all -v to check what is going on. When on WSL 2 make sure that npiperelay.exe is on windows partition and path is right. For convenience I will be packing pre-build npiperelay.exe with wsl-ssh-agent. Please also ensure that socat is installed: sudo apt install socat.

NOTE: You may be running Linux distribution with OpenSSH version more recent than your Windows host has out of the box. Presently Ubuntu 22.04 and Arch both demonstrate this - communication with ssh-agent will fail. In such cases please visit Windows OpenSSH development and update your Windows OpenSSH with latest release.

NOTE: If you are having issues using wsl-ssh-agent-relay with systemd try adding :WSLInterop:M::MZ::/init:PF to /usr/lib/binfmt.d/WSLInterop.conf. For example (thanks to rkl110 - Microsoft/WSL - Issue 8843):

sudo sh -c 'echo :WSLInterop:M::MZ::/init:PF > /usr/lib/binfmt.d/WSLInterop.conf'

Helper to interface with Windows ssh-agent.exe service from WSL1 (replacement for ssh-agent-wsl).

GitHub Release

Windows has very convenient ssh-agent service (with support for persistence and Windows security). Unfortunately it is not accessible from WSL. This project aims to correct this situation by enabling access to SSH keys held by Windows own ssh-agent service from inside the Windows Subsystem for Linux.

My first attempt - ssh-agent-wsl was successful, but due to Windows interop restrictions it required elaborate life-time management on the WSL side. Starting with build 17063 (which was many updates ago) Windows implemented AF_UNIX sockets. This makes it possible to remove all trickery from WSL side greatly simplifying everything.

NOTE: If you need access to more functionality (smard cards, identity management) provided by GnuPG set of tools on Windows or if you are looking for compatibility with wider set of utilities, like Git for Windows, Putty, Cygwin - you may want to take a look at win-gpg-agent instead.

wsl-ssh-agent-gui.exe is a simple "notification tray" applet which maintains AF_UNIX ssh-agent compatible socket on Windows end. It proxies all requests from this socket to ssh-agent.exe via named pipe. The only thing required on WSL end for it to work is to make sure that WSL SSH_AGENT_SOCK points to proper socket path. The same socket could be shared by any/all WSL sessions.

As an additional bonus wsl-ssh-agent-gui.exe could work as remote clipboard server so you could send your clipboard from tmux or neovim remote session back to your windows box over SSH secured connection easily.

NOTE: BREAKING CHANGE Version 1.5.0 introduces breaking change. If you were not using wsl-ssh-agent-gui.exe as lemonade clipboard backend - this should not concern you at the slightest. Otherwise lemonade support no longer - it has been replaced with gclpr which is more secure.

NOTE: BREAKING CHANGE Version 1.6.0 introduces breaking change. If you were not using wsl-ssh-agent-gui.exe as gclpr clipboard backend - this should not concern you at the slightest. Otherwise starting with v1.1.0 gclpr server backend (included with v1.6.0) enforces protocol visioning and may require upgrade of gclpr tools.

SECURITY NOTICE: All the usual security caveats applicable to WSL apply. Most importantly, all interaction with the Win32 world happens with the credentials of the user who started the WSL environment. In practice, if you allow someone else to log in to your WSL environment remotely, they may be able to access the SSH keys stored in your ssh-agent. This is a fundamental feature of WSL; if you are not sure of what you're doing, do not allow remote access to your WSL environment (i.e. by starting an SSH server).

COMPATIBILITY NOTICE: wsl-ssh-agent-gui was tested on Windows 10 1903 with multiple distributions and should work on anything starting with 1809 - beginning with insider build 17063 and would not work on older versions of Windows 10, because it requires AF_UNIX socket support feature.

Installation

    scoop install https://github.com/rupor-github/wsl-ssh-agent/releases/latest/download/wsl-ssh-agent.json

and updating:

    scoop update wsl-ssh-agent

Alternatively download from the releases page and unpack it in a convenient location.

Starting with v1.5.1 releases are packed with zip and signed with minisign. Here is public key for verification:

  RWTNh1aN8DrXq26YRmWO3bPBx4m8jBATGXt4Z96DF4OVSzdCBmoAU+Vq

Usage

  1. Ensure that on Windows side ssh-agent.exe service (OpenSSH Authentication Agent) is started and has your keys. (After adding keys to Windows ssh-agent.exe you may remove them from your wsl home .ssh directory - just do not forget to adjust IdentitiesOnly directive in your ssh config accordingly. Keys are securely persisted in Windows registry, available for your account only). You may also want to switch its startup mode to "automatic". Using powershell with elevated privileges (admin mode):
	Start-Service ssh-agent
	Set-Service -StartupType Automatic ssh-agent
  1. Run wsl-ssh-agent-gui.exe with arguments which make sense for your usage. Basically there are several ways:

    • Using -socket option specify "well known" path on Windows side and then properly specify the same path in every WSL session:

      Windows: cmd wsl-ssh-agent-gui.exe -socket c:\wsl-ssh-agent\ssh-agent.sock

      WSL: bash export SSH_AUTH_SOCK=/mnt/c/wsl-ssh-agent/ssh-agent.sock

    • You could avoid any actions on WSL side by manually setting SSH_AUTH_SOCK and WSLENV=SSH_AUTH_SOCK/up on Windows side (see note below).

    • Using -setenv option allows application automatically modify user environment, so every WSL session started while wsl-ssh-agent-gui.exe is running will have proper SSH_AUTH_SOCK available to it (using WSLENV). By default socket path points to user temporary directory. Usual Windows user environment modification rules are applicable here (see note below).

NOTE: Setting SSH_AUTH_SOCK environment on Windows side may (and probably will) interfere with some of Windows OpenSSH. As far as I could see presently utilities in Windows\System32\OpenSSH expect this environment variable to be either empty or set to proper ssh-agent.exe pipe, otherwise they cannot read socket:

	if (getenv("SSH_AUTH_SOCK") == NULL)
		_putenv("SSH_AUTH_SOCK=\\\\.\\pipe\\openssh-ssh-agent");

To avoid this and still be able to use -setenv and automatically generated socket path use -envname to specify variable name to set. Later on WSL side you could use:

export SSH_AUTH_SOCK=${<<YOUR-NAME-HERE>>}

When wsl-ssh-agent-gui.exe is running you could see what it is connected to by clicking on its icon in notification tray area and selecting About. At the bottom of the message you would see something like:

Socket path:
  C:\Users\rupor\AppData\Local\Temp\ssh-273683143.sock
Pipe name:
  \\.\pipe\openssh-ssh-agent
Remote clipboard:
  gclpr is serving 2 key(s) on port 2850

For security reasons unless -nolock argument is specified program will refuse access to ssh-agent.exe pipe when user session is locked, so any long running background jobs in WSL which require ssh may fail.

Options

Run wsl-ssh-agent-gui.exe -help

---------------------------
wsl-ssh-agent-gui
---------------------------

Helper to interface with Windows ssh-agent.exe service from WSL

Version:
	1.5.0 (go1.15.6)

Usage:
	wsl-ssh-agent-gui [options]

Options:

  -debug
    	Enable verbose debug logging
  -envname name
    	Environment variable name to hold socket path (default "SSH_AUTH_SOCK")
  -help
    	Show help
  -line-endings string
    	Remote clipboard convert line endings (LF/CRLF)
  -nolock
    	Provide access to ss-agent.exe even when user session is locked
  -pipe name
    	Pipe name used by Windows ssh-agent.exe
  -port int
    	Remote clipboard port (default 2850)
  -setenv
    	Export environment variable with 'envname' and modify WSLENV
  -socket path
    	Auth socket path (max 108 characters)

Example

Putting it all together nicely - remote here refers to your wsl shell or some other box or virtual machine you could ssh to.

For my WSL installations I always create ~/winhome and link it to my Windows home directory (where I have .wsl directory with various interoperability tools from Windows side). I am assuming that gclpr is in your path on remote and you installed it's Windows counterpart somewhere in drvfs location (~/winhome/.wsl is a good place).

I auto-start wsl-ssh-agent-gui.exe on logon on my Windows box using following command line:

wsl-ssh-agent-gui.exe -setenv -envname=WSL_AUTH_SOCK

In my .bashrc I have:

[ -n ${WSL_AUTH_SOCK} ] && export SSH_AUTH_SOCK=${WSL_AUTH_SOCK}

and my .ssh/config entries used to ssh to remote have port forwarding enabled:

RemoteForward 2850 127.0.0.1:2850

On remote my tmux.conf includes following lines:

set -g set-clipboard off
if-shell 'if [ -n ${WSL_DISTRO_NAME} ]; then true; else false; fi' \
  'bind-key -T copy-mode-vi Enter send-keys -X copy-pipe-and-cancel "~/winhome/.wsl/gclpr.exe copy" ; bind-key -T copy-mode-vi MouseDragEnd1Pane send-keys -X copy-pipe-and-cancel "~/winhome/.wsl/gclpr.exe copy"' \
  'bind-key -T copy-mode-vi Enter send-keys -X copy-pipe-and-cancel "gclpr copy" ; bind-key -T copy-mode-vi MouseDragEnd1Pane send-keys -X copy-pipe-and-cancel "gclpr copy"'

And my neovim configuration file init.vim on remote has following lines:

set clipboard+=unnamedplus
if has("unix")
	" ----- on UNIX ask lemonade to translate line-endings
	if empty($WSL_DISTRO_NAME)
		if executable('gclpr')
			let g:clipboard = {
				\   'name': 'gclpr',
				\   'copy': {
				\      '+': 'gclpr copy',
				\      '*': 'gclpr copy',
				\    },
				\   'paste': {
				\      '+': 'gclpr paste --line-ending lf',
				\      '*': 'gclpr paste --line-ending lf',
				\   },
				\   'cache_enabled': 0,
				\ }
		endif
	else
		" ---- we are inside WSL - reach out to the Windows side
		if executable($HOME . '/winhome/.wsl/gclpr.exe')
			let g:clipboard = {
				\   'name': 'gclpr',
				\   'copy': {
				\      '+': $HOME . '/winhome/.wsl/gclpr.exe copy',
				\      '*': $HOME . '/winhome/.wsl/gclpr.exe copy',
				\    },
				\   'paste': {
				\      '+': $HOME . '/winhome/.wsl/gclpr.exe paste --line-ending lf',
				\      '*': $HOME . '/winhome/.wsl/gclpr.exe paste --line-ending lf',
				\   },
				\   'cache_enabled': 0,
				\ }
		endif
	endif
endif

Now you could open your WSL in terminal of your choice - mintty, cmd, Windows terminal, ssh to your remote using keys stored in Windows ssh-agent.exe without entering any additional passwords and have your clipboard content back on Windows transparently.

Credit


Licensed under the GNU GPL version 3 or later, http://gnu.org/licenses/gpl.html

This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.

Owners

Tsunenobu Kai

Authors

rupor-github

Project URL

https://github.com/rupor-github/wsl-ssh-agent

License

GPL-3.0

Tags

ssh wsl

Info

653 total downloads
202 downloads for version 1.6.6
Download (5.36 MB)
Found on the current feed only

Package history

Version Size Last updated Downloads Mirrored?
1.6.6 5.36 MB Tue, 14 Mar 2023 00:24:31 GMT 202
1.6.3 5.42 MB Sun, 02 Oct 2022 16:10:37 GMT 196
1.6.2 5.41 MB Fri, 19 Aug 2022 16:10:58 GMT 57
1.6.1 4.85 MB Wed, 27 Apr 2022 00:28:25 GMT 83
1.6.0 4.84 MB Sat, 23 Apr 2022 16:11:12 GMT 1
1.5.2 4.76 MB Tue, 13 Apr 2021 09:23:33 GMT 42
1.5.2-pre 16.3 KB Tue, 13 Apr 2021 09:20:57 GMT 0
1.5.1 4.76 MB Wed, 10 Mar 2021 12:27:55 GMT 11
1.5.1-pre 16.3 KB Wed, 10 Mar 2021 12:24:49 GMT 2
1.5.0 4.7 MB Fri, 08 Jan 2021 17:03:31 GMT 16
1.4.2 5.32 MB Mon, 16 Mar 2020 00:06:03 GMT 26
1.4.1 4.41 MB Sat, 25 Jan 2020 08:06:16 GMT 10
1.4 4.41 MB Fri, 29 Nov 2019 08:05:52 GMT 3
1.3 4.41 MB Thu, 21 Nov 2019 09:31:22 GMT 2
1.2.2 4.49 MB Tue, 19 Nov 2019 13:47:45 GMT 2